Ride Whatever Decal

DECAL APPLICATION INSTRUCTIONS

FOR BEST RESULTS, APPLY DECALS IN DRY ENVIRONMENT WITH TEMPERATURE AT LEAST 55 DEGREES FAHRENHEIT

STEP 1:
Clean the area thoroughly with rubbing alcohol or soap and water. Do not use Windex or similar products because it will leave a residue behind that will prevent the sticker from adhering well.

STEP 2:
Prepare the sticker for application by firmly rubbing a squeegee or credit card across the clear transfer tape. This removes any air bubbles that may have formed and makes the sticker cling to the transfer tape.

STEP 3:
Peel the white grid paper backing off the sticker. If the sticker clings to the backing, slowly replace the paper backing and repeat Step 2.

STEP 4:
Slowly lower the sticker onto the surface and rub it in place firmly with a squeegee or credit card. For best results, wait 24 hours before moving to the next step.

STEP 5:
Slowly peel the transfer tape off at an angle. Be careful not to pull the sticker off the surface. If sticker pulls away from the surface repeat Step 4